1. Right click Start Button -> Select "Run"

2. In the run box, enter "control" press enter

3. Ensure the View By drop down is set to "Large Icons"

4. Select the Network and Sharing Center Icon

5. Select Change Adapter Settings

6. Right click the "vpn.mslcc.com" adapter, select properties

7. Go to the Security tab

8. Select the Properties button under the EAP option

9. Your window will look like this

10. Change the following

Connect to these servers: Current: 2012dc.mslcc.com -> Change to: nps01.mslcc.com
Trusted root certification Authorities: check all named "MSLCC-PKI-01" (you may only have 2 or 3 options of this entry)

When done it will look like this

11. Select Configure next to "Smart Card or other certificate"

12. The next windows will look very similar to this

13. Change the following

Connect to these servers: Current: 2012dc.mslcc.com -> Change to: nps01.mslcc.com
Trusted root certification Authorities: check all named "MSLCC-PKI-01" (you may only have 2 or 3 options of this entry)

When done it will look like this

14. Press OK on the Smart Card or other Certificate Properties window

15. Press OK on the Protected EAP Properties window

16. Press OK on the vpn.mslcc.com Properties window

17. Connect the VPN

18. VPN should be connected